Knife gate valves and Pinch valve

Knife gate valves from Valvulas Zubi S.L. WAFER , LUG type and flanged connection for low and high pressure,  European origin. Pinch valves and sleeves from AKO Armaturen & Separationstechnik GmbH,  leading European manufacturer since 1984.
Contacts us
Application

Knife gate valves from Valvulas Zubi S.L. WAFER , LUG type and flanged connection for low and high pressure,  European origin.

The knife gate valves provide full passage of the working fluid, and the main models are:
WAFER DN50–1200, PN10/16
LUG DN50–700, PN16
Flanged DN150-DN1600, PN25

  • Bodies: GG25, GGG40, GGG50, A216 WCB, CF8 (AISI304), CF8M (AISI316), 254SMO, SS310, SS904
  • Knife: AISI304L, AISI316L, AISI316TI, 310S, AISI904L, 254SMO, HARDOX
  • Seat: EPDM, NITRILE (NBR), SILICONE, VITON, GRAPHITE, FLUCAST, PTFE
  • Operation: Manual with handwheel and pneumatic operation (with double acting and single acting) pneumatic cylinder.
 

Pinch valves and sleeves from AKO Armaturen & Separationstechnik GmbH, leading European manufacturer since 1984.

  • Application: Control of fluids aggressive to metal, as well as highly abrasive fluids
  • Range: Chemical industry, energy, industrial production, food industry , transport (Auto-silos)
  • Operation: Pneumatic actuator (pneumatic operation), manual operation, direct pneumatic
  • Sizes: up to DN1200 depending on the modification and type 

Main advantages:

  • Modern and reliable design, allowing in the open position the valve to be a continuation of the pipe installation, ensuring complete passage, as the fluid is not in contact with any part of the valve
  • Reliable performance with abrasive fluids and fluids hindering the operation of standard  valves
  • Easy replacement of the working part (sleeve or flanges)
  • The body of the pinch valve is not subject to wear.
Изработка на уебсайт: Уебрикс